Dragon Scale Gauntlet Pattern PDF - Digital Download
Perhaps the coolest pattern in the shop, these awesome gauntlets will make any armor costume look incredible! Perfect for any costume that requires hand armor, these articulating segmented designs can be modified for use for any costume. This design was originally created for my Nemesis costume, but could easily be adapted for any other design. Instructions included. Print pattern pieces on 8.5” x 11” paper at 100%, set to “borderless”. I have included 5 sizes and a helpful sizing chart to assist you with making these fit as perfectly as possible!
This is a downloadable PDF pattern to use with any sturdy material that is thin (like cereal-box-material thin), but is perfect for thermoplastics like Worbla, MTP, Thibra and Wonderflex, etc. The hand pieces are designed to be made with 6mm, 4mm and/or 2mm EVA foam but you can use Thermoplastics or leather. Simply print the pages at border set to "none" and follow the instructions to create a mockup. This pattern is designed to be simple to use, but please contact me if you have any questions and I will be glad to help!
Video tutorial is coming soon, but these take a huge amount of time, so please be patient :)
🗡️🗡️🗡️🗡️🗡️🗡️🗡️🗡️
Recommended Materials & Equipment needed:
Scissors
1/16" hole punch or awl This is the one I use - (Affiliate Link)
Micro Mini or Small Brads (paper fasteners). I get mine here: https://bit.ly/MicroRoundFasteners-Brads
Approximately 12" x 16" sheet of thermoplastic or other sturdy, thin material (suggested). This measurement will change based on the final sizes of your gauntlet. I used MTP from Micromark for my project that you can see in the images in this listing.
5" x 8" of 2mm, 4mm or 6mm EVA Foam (recommended). This measurement will change based on the final sizes of your gauntlet.
🗡️🗡️🗡️🗡️🗡️🗡️🗡️🗡️
Thank you and happy building!
Perhaps the coolest pattern in the shop, these awesome gauntlets will make any armor costume look incredible! Perfect for any costume that requires hand armor, these articulating segmented designs can be modified for use for any costume. This design was originally created for my Nemesis costume, but could easily be adapted for any other design. Instructions included. Print pattern pieces on 8.5” x 11” paper at 100%, set to “borderless”. I have included 5 sizes and a helpful sizing chart to assist you with making these fit as perfectly as possible!
This is a downloadable PDF pattern to use with any sturdy material that is thin (like cereal-box-material thin), but is perfect for thermoplastics like Worbla, MTP, Thibra and Wonderflex, etc. The hand pieces are designed to be made with 6mm, 4mm and/or 2mm EVA foam but you can use Thermoplastics or leather. Simply print the pages at border set to "none" and follow the instructions to create a mockup. This pattern is designed to be simple to use, but please contact me if you have any questions and I will be glad to help!
Video tutorial is coming soon, but these take a huge amount of time, so please be patient :)
🗡️🗡️🗡️🗡️🗡️🗡️🗡️🗡️
Recommended Materials & Equipment needed:
Scissors
1/16" hole punch or awl This is the one I use - (Affiliate Link)
Micro Mini or Small Brads (paper fasteners). I get mine here: https://bit.ly/MicroRoundFasteners-Brads
Approximately 12" x 16" sheet of thermoplastic or other sturdy, thin material (suggested). This measurement will change based on the final sizes of your gauntlet. I used MTP from Micromark for my project that you can see in the images in this listing.
5" x 8" of 2mm, 4mm or 6mm EVA Foam (recommended). This measurement will change based on the final sizes of your gauntlet.
🗡️🗡️🗡️🗡️🗡️🗡️🗡️🗡️
Thank you and happy building!
Perhaps the coolest pattern in the shop, these awesome gauntlets will make any armor costume look incredible! Perfect for any costume that requires hand armor, these articulating segmented designs can be modified for use for any costume. This design was originally created for my Nemesis costume, but could easily be adapted for any other design. Instructions included. Print pattern pieces on 8.5” x 11” paper at 100%, set to “borderless”. I have included 5 sizes and a helpful sizing chart to assist you with making these fit as perfectly as possible!
This is a downloadable PDF pattern to use with any sturdy material that is thin (like cereal-box-material thin), but is perfect for thermoplastics like Worbla, MTP, Thibra and Wonderflex, etc. The hand pieces are designed to be made with 6mm, 4mm and/or 2mm EVA foam but you can use Thermoplastics or leather. Simply print the pages at border set to "none" and follow the instructions to create a mockup. This pattern is designed to be simple to use, but please contact me if you have any questions and I will be glad to help!
Video tutorial is coming soon, but these take a huge amount of time, so please be patient :)
🗡️🗡️🗡️🗡️🗡️🗡️🗡️🗡️
Recommended Materials & Equipment needed:
Scissors
1/16" hole punch or awl This is the one I use - (Affiliate Link)
Micro Mini or Small Brads (paper fasteners). I get mine here: https://bit.ly/MicroRoundFasteners-Brads
Approximately 12" x 16" sheet of thermoplastic or other sturdy, thin material (suggested). This measurement will change based on the final sizes of your gauntlet. I used MTP from Micromark for my project that you can see in the images in this listing.
5" x 8" of 2mm, 4mm or 6mm EVA Foam (recommended). This measurement will change based on the final sizes of your gauntlet.
🗡️🗡️🗡️🗡️🗡️🗡️🗡️🗡️
Thank you and happy building!
